Welcome to Perry Impex +22 28205026

marketing@perryimpex.in

PERRY SHINE LACQUER

HIGH PERFORMANCE FLEXIBLE CLEAR SEALER FOR PAVERS & CONCRETE SURFACE

DESCRIPTION: 

PERRY SHINE LACQUER is the latest high performance clear wet-look microporous transparent resin that protects pavers and slabs made of concrete or natural stone. It reduces oil and dirt penetration, and makes cleaning easier. Easy to apply, it penetrates deeply for maximum effectiveness and durability.PERRY SHINE LACQUER provides the ultimate deep penetration, protection and enhancement for all concrete, masonry, paver bocks and stone surfaces.

USES:

PERRY SHINE LACQUER is ideal for use on: Manufactured and natural stone.Coloured and stamped concretePaver bocks Masonry bricks Marble and granite Interlocking concrete pavers Fly ash bricks

ADVANTAGES:

Extremely low VOC.Resistance to oil and grease stains.Interior and exterior use.Enhance original colors and give a wet look.Protects against oil, water and dirt.Make surface easier to clean. Recoatable.

LIMITATIONS : Not recommended for pre-sealed surfaces or non-porous surfaces such as ceramic tile, porcelain and terrazzo.

PROPERTIES:

Appearance                            :           Wet -Clear & Dry -clear, gloss.

Odour                                     :           Low odor

Drying Time                           :           45 mins. @ 30 0C.

Recoat                                    :           3 hours @ 30 0C.

Surface Preparation

Surface must be completely clean and dry to the touch.

Concrete pavers:

Remove all stains and contaminants (oil, rust, etc.) with appropriate CLEANING PRODUCTS.

Natural stones and poured concrete:

Remove oil and grease stains using DIRT AND GREASE CLEANER.

Mixing :

Stir well before use.

Application :

Apply the PERRY SHINE LACQUER on the prepared surface by brush or roller. One coat will seal and protect the surface,while additional coats will give more protection and high gloss.

Tools Cleaning:

Tools and equipment can be easily cleaned with clean water.

PACKING & COVERAGE

PERRY SHINE LACQUER is available in 1, 5, 10, 50 & 100 Ltrs. Drums. 1 Ltr.of

PERRY SHINE LACQUER will cover 40 to 45 sq.ft depending on the porosity of the treated surface.

SHELF LIFE & STORAGE

PERRY SHINE LACQUER has a shelf life of 12 months from date of manufacture when kept at a temperature between 5 0C to 45 0C and store in the original, unopened container. All material shall be stored under cover in a manner that will prevent damage preferable on pallets and protected from excessive heat and moisture. Do not freeze.

HEALTH & SAFETY

PERRY SHINE LACQUER should not come into contact with skin, eyes or be swallowed. Protective glasses should be worn during mixing and application. Should PERRY SHINE LACQUER come in to contact with skin, remove before hardening by washing with soap and water. Should accidental eye contact occur wash with plenty of water and seek medical advice. If swallowed seek medical advice immediately. Do not induce vomiting. For full health and safety data refer to Product Safety Data Sheet.

PERRY SHINE LACQUER

Instruction for use:

Surface Preparation

Surface must be completely clean and dry to the touch.

Concrete pavers:

Remove all stains and contaminants (oil, rust , etc . )  with appropriate CLEANING PRODUCTS.

Natural stones and poured concrete:

Remove oil and grease stains using DIRT AND GREASE CLEANER.

Mixing :

Stir well before use.

Application :

Apply the PERRY SHINE LACQUER on the prepared surface by brush or roller. One coat will seal and protect the surface, while additional coats will give more protection and high gloss.

Tools Cleaning :Tools and equipment can be easily cleaned with clean water.

PACKING & COVERAGE

PERRY SHINE LACQUER is available in 1, 5, 10, 50 & 100 Ltrs. Drums. 1 Ltr.of PERRY SHINE LACQUER will cover 40 to 45 sq.ft depending on the porosity of the treated surface.

SHELF LIFE & STORAGE

PERRY SHINE LACQUER has a shelf life of 12 months from date of manufacture when kept at a  temperature between 5 0C to 45 0C and store in the original, unopened container. All material shall be stored under cover in a manner that will p re ve n t damage preferable on pallets and protected from excessive heat and moisture. Do not freeze. PERRY SHINE LACQUER should not come into contact with skin, eyes or be swallowed. Protective glasses should be worn during mixing and application. Should PERRY SHINE LACQUER come into contact with skin, remove before hardening by washing with soap and water. Should accidental eye contact occur wash with plenty of water and seek medical advice. If swallowed seek medical advice immediately. Do not induce vomiting. For full health and safety data refer to Product Safety Data Sheet.

NON WARRANTY:

The information herein is based upon the best information available at the time of printing. Data provided is intended for those having skill and ability to use products recommended in a safe and responsible manner. LIABILITY is limited to the cost of material proven to be defective. There is no warranty expressed or implied as related to any issue which is deemed to be a direct result of improper surface preparation or cleaning, application over concrete or cementitious surfaces which have not reached full cure, those having excessive rising moisture/vapor or hydrostatic pressure, application over surfaces which have previously been sealed without first testing for compatibility/adhesion, adverse water conditions, acts of God or acts of others, constant

submersion in harsh environments, workmanship or applicator, or any other cause and effect which is not related to defective material.